Configuring The Msr - Meridian System Remote User Manual

Configuring the MSR

As supplied, the Meridian System Remote is configured for use
with Meridian 500 Series products.
If you have either Meridian 200 Series or 600 Series products in
your system you should reconfigure the MSR as described in
this chapter.
To configure the MSR
Open the case, as described in To disassemble the Meridian
System Remote, page 10.
Select the option required from the following table.
Use this option
Option 1
Option 2
Option 3
Option 4
12
For these products
500 Series products and/or digital
loudspeakers in 500 Series mode.
200 Series or 500 Series products in
200 Series mode.
Digital loudspeakers in 200 Series
mode.
601 Preamplifier.
Use the jumpers, shown in the diagram below, to select the
required option.
The key actions for each of the options are listed on the
following pages.
Option 1
Option 2
Option 3
Option 4