Table of Contents
Advertisement
IMPORTANT! Test sound reception of this monitor before first time
use and whenever you change location of transmitter (see page 5).
1
Set transmitter channel switch to same channel as receiver.
Place transmitter in same room with child. Point microphone
2
directly toward crib or play area.
3
Unwrap and fully extend power cord for best transmission.
Plug transmitter power cord into wall outlet.
4
Slide transmitter power switch to turn power on.
Power indicator lights.
5
Place receiver where you will see or hear it.
6
If you will be using receiver near a wall outlet, we recommend
that you use the AC adaptor. Unwrap and fully extend AC
adaptor cord for best reception. Plug AC adaptor cord into
wall outlet.
7
Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume.
Note: AC adaptor is 120 VAC, 60Hz, 3W input; 6 VDC 100mA output;
center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm.
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01628 500303.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812
(valid only in Australia).
8
Advertisement
Table of Contents
