Window
Kit Assembly
I. Parts:
A) 2 Track Screws
B) 2 Wing Nuts
C 1 & C2) 2 Hose Panels,
one with Two Exhaust
Hose Openings
D) 1 SlidingTrack
Panel
5. Next,
take the other
Hose Panel
(C2) and connect
it to Hose Panel
(C 1) by placing
the Sliding
Track
Panel
(D) over
the rrack
Screw
(A) on Hose
Panel (C2).
2. Assembly:
First,
take the Track Screws
(A) and screw
one
into each of the small holes
found
on the Hose
Panels
(CI & C2).
3. Next. take the Wing Nuts
(B) and tighten
them
around
each of the Track
Screws
(A).
Do not tighten
the Wing Nuts
(B) all the way; make
sure they are
somewhat
loose.
4. Now, place
the Sliding
Track Panel
(D)
over
the Track
Screw
(A) on Hose Panel
(C 1).
6. The Hose Panels
(CI & C2) should
now be
connected
using the Sliding
Track
Panel (D).
7. '1_ complete
the assembly,
lj.gL_LcNthe Wing Nuts
(B) installed
earlier.
The finished
Window
Kit
should
resemble
the image
seen below