Advertisement
@@®
@®®
_
Press the MENU
but-
ton, then press the
CH(annel)
_
buttons to
select SmartLock.
Press
the VOL(ume)
I_ or _1
button to continue.
SmartL°ck
Enter Your Access Code
;_
Press the Number
buttons to enter your old
access code. If you have
never set up your personal
access code, use 0711. If
you do not know the old
code, enter 0711 TWICE.
_;_
Press the
CH(annel)
JJV
buttons
to select CHANGE
CODE. Then, press the
VOL(ume)
I_ or _1
button to continue.
SmartLock
BLOCK
_Use
the Number
buttons to enter your
desired access code in the
New Code space. Then,
enter the same code in
the Confirm
Code space.
Your
new access code is set.
You will return to the
SmartLock menu.
Confirm
Code
If "Wrong
Code Code
Unchanged" appears, repeat
step 4, making sure you
enter the same new code
exactly in the Confirm
Code
space.
button
You cannot use the
default code after you set up
your personal access code.
To restore 0711 as your per-
sonal access code, unplug the
TV's power cord for 10 sec-
onds, then plug it in again.This
is helpful when you forget your
personal access code.
_
Press the MENU
button,
then press the
CH(annel)
A/V
buttons
to
select a control.
EXIT
Ib
CTUR£
IIIIIII
31
®
®
button.
BRIGHTNESS
Press the VOL(ume)
I_/_1 buttons
until the darkest parts of the picture are as bright as
you prefer.
COLOR
Press the VOL(ume)
I_/_1 buttons to add
or reduce color.
PICTURE
Press the VOL(ume)
I_/_1 buttons until
the lightest parts of the picture show good detail.
SHARPNESS
Press the VOL(ume)
II_/_l
buttons
to improve detail in the picture.
TINT
Press the VOL(ume)
I_/_1 buttons to obtain
natural skin tones.
Cyosed Captioning allows
ou to read the voice con-
tent of television programs on
the TV screen. Designed to
help the hearing impaired, this
feature uses on-ssreen text
boxes to show dialogue and
conversations while the TV
program is in progress.
Note: Broadcast stations will
often use spelling abbrevia-
tions, symbols, dropouts and
other grammatical shortcuts in
order to keep pace with the
on-screen action. These factors
vary with the source of the
captioned text material and do
not indicate a need for TV
service.
Press the CC button
repeatedly
until the desired
Closed Caption
mode
appears on the screen.
You may choose CAPTION
1,
CAPTION
2, TEXT 1, TEXT 2,
or CAPTION
OFF.
Notes:
• Usually CAPTION
1 is the preferred
Closed Caption mode,
CAPTION
1 or 2: Dialogue (arid descriptions)
for the
action on the captioned TV program shows on the screen,
TEXT
1 or 2: A black box appears on the TV screen. If the
TEXT mode is available with the current TV program, text or
information
will appear.
CAPTION
OFF: Select to turn off Closed Captions com-
pletely.
• Captions
and texts may not match the TV voice broadcast
exactly.
• Interference
or a weak antenna/cable signal may cause the
Closed Captioning system to function
improperly.
• The caption or text characters will not appear if the menu is
on the screen.
• Remember, not all TV programs and commercials
are broad-
cast with Closed Captioning.
Neither are all Closed Caption
modes necessarily being used by a broadcast station during
the transmission
of a program.
Refer to your area's TV pro-
gram listings for the stations and times of shows with Closed
Captioning.
• If a black box appears on the screen, you have selected TEXT
1 or TEXT 2. To remove the black box, select CAPTION
1,
CAPTION
2, or CAPTION
OFF.
Closed
Captions will be
interrupted
briefly
when you mute or
adjust the volume,
change channels, or
press the
STATUS/EXIT
button to see the
current channel
number.
Coaxial
Cable - A single cable with a metal connector
that screws (or pushes) directly onto a 75_jack
(ANT(enna)
In jack) on the Television or VCR.
Display
- Allows the user to quickly confirm the current
channel number.
Jack Panel - The area on the back of the TV.
Menu - An on-screen listing of features that are available
for adjustments.
On-screen
Displays (OSDs)
- The wording or mes-
sages that help you set up features (color adjustment,
channel setup, etc.).
Programming
- Adding or deleting channels in the tele-
vision's memory. The television "remembers"
only the
locally available or desired channel numbers and skips
over any unwanted channel numbers.
Remote
Sensor
- An area on the front of the TV
through which remote control signalsare received.
Twin
Lead Wire
- The two-strand
300_ antenna wire
used with many indoor and outdoor
antenna systems. In
many cases, this type of antenna wire requires an
additional adaptor (or balun) in order to connect to the
ANT(enna) In jack on the TV.
Volume
Indicator - Appears on the TV screen when you
adjust the volume.
-7-
Advertisement
