Advertisement
Tr o load the batteries into the
emote:
1.Press
in the
tab
on the
battery
compartment
lid on the bottom
of the
remote
control,
then
lift
off the lid.
2. Insert
two
AA
batter-
ies (supplied)
into
the
battery
compartment
as indicated
inside
the
compartment.
Installing
batteries
incorrectly
may
damage
the remote
Control.
3.Replace
the
lid.
Battery
Compartment
Lid
Battery
SLEEP
Button
Press to set the TV to turn itself OFF
automatically.
Details are on page 5,
Number
Buttons
Press to select channels.
• Cable
Users
Enter channel numbers as a two-digit
number for
the quickest results. For example, to select chan-
nel 6, press 0,6. If you only press the Number 6
button,
channel 6 will be selected after a brief
delay. (There also may be a brief delay when you
select channels 10, 11, and 12.) If you want to
select channels 100 and above, enter channel
numbers as a three-digit
number. For example,
to select channel 117, press 1, 1, 7.
• Antenna
Users
Enter channel numbers as a two-digit
number for
the quickest results. For example, to select chan-
nel 5, press 0,5. If you only press the Number 5
button,
channel 5 will be selected after a brief
delay. You may only select channels 2-69.
STATUS/EXIT
Button
Press to see the current
channel number on the
TV screen. Press to remove
the on-screen
menu. You also may remove the menu by
pressing the CH(annel)
A/V
buttons to select
EXIT, then pressing the VOL(ume)
I_/_1
but-
tons. (You may need to select EXIT repeatedly
to completely
remove
all of the menus.)
-POWER
Button
Press to turn the TV ON and OFF.
ALT,
CH
(Alternate
Channel)
Button
Press to return
to the TV channel you were
viewing immediately
before switching to your
current
channel.
MENU
Button
Press to access or remove the on-screen
menu.
Press the CH(annel)
A/V
buttons to select an
item in the menu. Press the VOL(ume)
I1_/_1 but-
tons to adjust an item in the menu or to advance
to the next menu.
_MUTE
Button
Press to turn OFF the sound on the TV. Press
again to restore the sound.
VOL u(um_ I_/_1
Buttons
Press to adjust the TV sound level. Press to
adjust an item in the on-screen
menu or to
advance to the next menu.
If you press the VOL(ume)
_1 button
when the
sound is muted, the volume
indicator
will appear
on the screen. Pressing the VOL(ume)
I_ button
when the sound is muted will restore
the sound.
CH(annel)
AiJV Buttons
Press to scan through available channels. Details are on
page 3. Press to select an item in the on-screen
menu.
FM Button
Press to select FM radio mode. Details are on page
5. Press again to return
to TV mode.
CC (Closed
Caption)
Button
Press repeatedly
to select a Closed Caption
mode.
Details are on page 7.
TV/AUX
Button
Press to select A/V IN (for viewing video playback
at the TV from a VCR, camcorder,
DVD Player,
etc.). Press again to return
to another
TV channel.
Details are on page 3.
.
A/•
buttons
to adjust
the
sound
level.
"n=Ct;eVea2a ',Y,,C"oan:
e
l,,'
°'1
.........
¢"
========================
:iiiiiiiiiiii_:: " uiiiiu:
"iiiiiiii:..
;J=_
..
_
Remote Sensor
usiog
,Be r emote
toworn t.eIV
"::::::::::""
":EEEEEE:.
J
"EEEEEEE:.
::::::::::::::::
Note:
You can connect
earphones
(not supplied)
to the EARPHONE
jack on the front
of the TV
for private,
personal
listening.
You can connect
the
AUDIO!VIDEO
In jacks on the front
of the TV to the
AUDIO/VIDEO
OUT jacks of a camcorder,
VCR, or other
video equipment.
Details ape on page 3.
_
Press the MENU
button
to display the TV's on-screen
menu.
Press the CHANNEL
A!•
buttons to select an item in the
menu.
Press the VOLUME
A/•
but-
tons to adjust an item in the
menu or to advance to the next
menu.
Note:
To remove the menu,
)ress the CHANNEL
•/•
but-
ons to select EXIT. Then, press
the VOLUME •
or •
button.
(You may need to select EXIT
repeatedly to completely
remove
all of the menus.)
Or, press the MENU button,
repeatedly
if necessary, to
remove the MENU.
The current
channel number
will appear briefly
when the TV is first
turned ON and with
channel changes. To
display the channel
number for five
seconds, press the
STATUS/EXIT
button.
You can
turn on the
TV by pressing the
CHANNEL
J J•
but-
tons on the front of
the TV. The
CH(annel) JJ•
but-
tons of the remote
control will not turn
on the TV power.
AUTO
INSTALL (see page 3)
memorizes all the channels on
your Antenna or Cable TV system.
CHANNEL EDIT makes it easy
for you to add other channels or
drop unwanted channels from the
TV3 memory. Then, when you
use the CH(annel) ,a,,/_" buttons,
you will only scan through the
channels _ou want.
¢_
Press the MENU
but-
ton, then press the
CH(annel)
•/•
buttons
to
select SETUP.
I 1
SmartLock REVIEW
I_
IGHTNESS
IIIIhll
2
®
®
®
;_
Press the VOL(ume)
I_ or _1 button
to continue
to the SETUP
menu.
_;_
Press the CH(annel)
• /_ buttons
to select
CHANNEL
EDIT.
_
Press the VOL(ume)
I_ or _1 button
to continue
to the CHANNEL
EDIT
menu.
CHANNEL
will be selected.
_;)
While
CHANNEL
is
selected,
press the
VOL(ume)
II_ or _1 button
or the Number
buttons
to
select the channel
you
want to add or skip.
_;_
Press the CH(annel)
• /•
buttons
to select
SKIPPED.
Then,
press the VOL(ume)
I_ or _1 button
to set
SKIPPED
to YES (if you want
to skip past the channel when
using the CH(annel)
•1_
but-
tons) or NO (if you want the
channel to be available when
you are using the CH(annel)
• 1• buttons).
_
Press the
STATUS/EXIT
button
when you are fin shed.
-4-
Advertisement
