Advertisement
lease make these simple
checks be fi_re calling for
service.
These tips can save you
time and money since charges.for
TV installation
and adjustment
of
customer
controls
are itol
covered
under your warran&.
No Power
No picture
No Sound
Remote Does Not
Work
TV Displays Wrong
Channel or No
Chan[els
Above 13
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
I
'permanently on the picture tube. When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal TV viewing.
i Check the TV power cord. Unplug the TV, wail 1 minute, then reinsen plug into outlet
and push POWER button again.
I
Check to be sure outlet is not on a wall switch.
i
Ii
heck antenna connections on the rear of the TV. Are they properly secured to the
antenna plug on the TV?
Check the CABLE/YES
NO control for correct position.
[_ Check the VOLUME buttons.
Check the MUTE button on the remote control..
i
Check batteries. Replace with two Heavy Duty (Z nc Chloride) or Alkaline AAA
batteries if necessary.
Clean the remote and the remote sensor window on the TV.
i Repeat
channel
selection.
Add desired
channel
numbers
(CHANNELS
control)
into TV memory.
Check CABLE/
YES
NO control for correct position.
4
Cleaning and Care
This TV is equipped with protective circuitry that shuts the TV off in case of moderate
power surges. Should this occur turn the TV back on by pressing the POWER button
once or twice, or unplug and then replug the power cord at the AC outlet.
This feature is NOT designed to prevent damage due to high power surges such as those
caused by lightning, which is not covered by your warranty.
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive).
Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap
or detergent.
Use a clean dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the cabinet back.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
20
Advertisement
