Advertisement
uto Programming (see pre_ious
page) adds all the channels it
can find (on your Antenna or Cable
TV system) into the TV's memory.
Add/Delete Channels makes it easy
for you to add other channels, or
drop unwanted channels, from the
list of channels in the TV's memory.
<_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word CHANNEL with the
TV's on-screen arrow.
<_
Press the CHANNEL • or •
I buttons (or Channel Number but-
I
tons on the remote) to select the
I
channel you want to SAVE (or
I DELETE.)
_,' _
Press the (+) button to SAVE
the selected channel number into
memory.
Press the (-) button to DELETE
a channel from memory.
<_
Press the STATUS button to
I clear the screen after adding all
I the channels you want.
Try ikout. Press the
! CHANNELA•
buttons.
The channels you SAVED should
appear, ffhe channels you
DELETED should not appear.
Remember, you can also add the
VCR/AUX mode (see page 20)
into the TV's channel memory.
Then by pressing the CH • •
buttons you can quickly select the
Audio/Video Input jacks on the
rear of the TV. Just "SAVE" the
VCR/AUX mode (located between
the lowest and highest channel
numbers) into the TV's memory.
/
12
/
7
-'
.[
Advertisement
