Advertisement
OTE: If you went through
etup (in your Quick Use
Guide), this task has already been
completed for you.
Your TV can automatically set
itself for local area (or Cable TV)
channels. This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
• • buttons are pressed.
<_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word PROGRAM with the
TV's on-screen arrow.
<_TVPress
the (+) button (on the
or the remote) to PROGRAM.
_
Press the (+) button again to
" start the TV search for area chan-
nels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the channel
search is completed the TV will
return to the last viewed channel.
<_
Press STATUS button to clear
the screen.
Try it out. Press CHAN-
! NEL ••
buttons and see
which channels have been added.
Remember, if you want to drop any
unwanted channels from the TV's
memory, see the next page on how
to "Manually" add and delete chan-
nels.
Note: As the TV searches for chan-
nels to "ADD" into memory the on-
screen display may move (or jitter
slightly). This is normal operation
and does not indicate a need for ser-
vice.
"RED" channel numbers have been
added ,to the TV's memory.
"WHITE"
channel numbers are not
present in the TV's program memory.
PRESS+TO
AUTO PROGRAM
CHANNELS
PIP
--......
m,,.,
!
The TV screen will be blocked off
until the search for channels is .
done.
Advertisement
