Advertisement
q>qE
4>--
SLEEP
@
O
pOWER
®®
@
-®@
@
©@@
STATU_,EXT
ALTOH
_
Press the MENU
but-
ton, then press the
CH(annel)
• or • button
to select SmartLock.
Press
the VOL(ume)
I1_ or _1
button to continue.
Smar[Lock
}
Enter Your Access Code
_
Press the Number
buttons to enter your old
access code. If you have
never set up your personal
access code, use 071 I. If
you do not know the old
code, enter 0711 TWICE
4>
Press the
CH(annel)
• or • but-
ton to select CHANGE
CODE.
Then, press the
VOL(ume)
I_ or _1
button to continue.
BLOCK
CHANGE
CODE
_Use
the Number
buttons to enter your
desired access code in the
New Code space. Then,
enter the same code in
the Confirm
Code space.
Your
new
access
code
is set.
You will return to the
SmartLock
menu.
Confirm Code
If "Wrong
Code Code
Unchanged" appears, repeat
step 4, making sure you
enter the same new code
exactly in the Confirm
Code
space.
_?US_E_;
button.
You cannot
use the
default code (071 I) after you
set up your personal access
code.
To restore 071 I as your per-
sonal accesscode, unplug the
TV's power cord for l0 sec-
onds, then plug it in again.This
is helpful when you forget your
_ersonal access code.
Access codes must have exactly
four digits.
_
Press the MENU
buttonj
then press the
CH(annel)
•
or •
button
to select a control.
_J_ NESS
N
CO[OP,
illlll';
3i
CTURE
IIIII'"
31
<_
Press the VOL(ume)
I_/_1 buttons
to adjust the
[selected
picture
control.
®@@
©@@
4>-
@o
_Press
the
STATUS/EXIT
button.
BRIGHTNESS
Press the VOL(ume) I_/_1 buttons
until the darkest parts of the picture are as bright as
you prefer.
COLOR
Press the VOL(ume)
I_/_1 buttons to add
or reduce color.
PICTURE
Press the VOL(ume) I_/_1 buttons until
the lightest parts of the picture show good detail.
SHARPNESS
Press the VOL(ume)
I_/_1 buttons
to improve detail in the picture.
TINT
Pressthe VOL(ume) I_/_1 buttons to obtain
natural skin tones.
ClyOSed Captioning allows
ou to read the voice con-
tent of television programs on
the TV screen. Designed to
help the hearing impaired, this
"eature
uses
on-screen
text
)oxes to show dialogue and
conversations while the TV
program is in progress.
Note: Broadcast stations will
often use spelling abbrevia-
tions, symbols, dropouts and
other grammatical shortcuts in
order to keep pace with the
on-screen action. These factors
vary with the source of the
captioned text material and do
not indicate a need for TV
service.
_
Press the CC button
repeatedly
until
the desired
Closed Caption
mode
appears on the screen.
You may choose CAPTION
I,
CAPTION
2, TEXT
I, TEXT 2,
or CAPTION
OFF.
Notes:
• Usually CAPTION I is the preferred Closed Caption mode.
CAPTION
I or 2: Dialog (and descriptions) for the action
on the captioned TV program shows on the screen.
TEXT
I or 2: A black box appears on the TV screen. If the
TEXT mode is available with the current TV program, text or
information will appear.
CAPTION
OFF: Select to turn off Closed Captions com-
pletely.
• Captions and texts may not match the TV voice broadcast
exactly.
• Interference or a weak antenna/cable signal may cause the
Closed Captioning system to function improperly.
• The caption or text characters will not appear if the menu is
on the screen.
• Remember, not all TV programs and commercials are broad-
cast with Closed Captioning. Neither are all Closed Caption
modes necessarily being used by a broadcast station during
the transmission of a program. Refer to your area's TV pro-
gram listings for the stations and times of shows with Closed
Captioning.
• If a black box appears on the screen, you have selected TEXT
I or TEXT 2. To remove the black box, select CAPTION I,
CAPTION 2, or CAPTION OFF.
Closed
Captions will be
interrupted
briefly
when you mute or
adjust the volume,
change channels, or
press the
STATUS/EXIT
button to see the
current channel
number.
Coaxial Cable - A singlecable with a metal connectorthat screws (or pushes)direct-
ly onto a 75_ jack (ANT(enna) In jack) on the Television or VCR.
Display - Allows the user to quickly confirm the current channel number.
Menu - An on-screen listing of features that are availablefor adjustments.
On-screen Displays - The wording or messages that help you set up features.
Programming - Adding or deleting channelsin the television's memory. The televi-
sion "remembers" only the locally availableor desired channel numbers and skips over
any unwanted channelnumbers.
Remote
Sensor - An area on the front of the TV through which remote control sig-
nals are received.
Twin Lead Wire
- The two-strand
300_Qantenna wire used with many indoor and
outdoor antenna systems. In many cases, this type of antenna wire requires an
additional adapter (or balun) in order to connect to the ANT(enna) In jack on the TV.
Volume Indicator - Appears on the TV screen when you adjust the volume.
7
Advertisement
