Advertisement
Follow these steps to quickly
dd area channels into the
TV's memory. Before you
begin, make sure batteries are
in the remote control and you
are familiar with the remote.
Details are provided below.
SLEEP
O
POWER
©®@
®@@
®@@
o@o
_
Press the MENU but-
ton. The main menu appears
on the TV screen.
SETUP
I_
EXit
I _
C_cLOR
llllluuu
31
TURE
llllluuu
31
_Press
the CH(annel) •
or • button to select SETUP.
Then, press the VOL(ume)
I_ or <1 button
to continue.
_
Press the CH(annel)
• or
• button to select AUTO
INSTALL.
Then, press the
VOL(ume)
I_ or <1 button
to
enter AUTO
INSTALL,
which
will set up the channels.
When setup is complete, the
SETUP menu will reappear for
about 30 seconds, then the low-
est stored channel will appear.
Now, when you press the
CH(annel)
• or •
button, you
will only scan through channels
that are available. You still may
select non-memorized
channels
by pressing the Number
buttons.
Tr
o load the batteries into the
emote:
I.Press
in the tab on the
battery
compartment
lid on the bottom
of the
remote control,
then lift
off the lid.
2. Insert
two AA batter-
ies (supplied)
into the
battery
compartment
as indicated inside the
compartment. Installing
batteries incorrectly
may
damage the remote
control.
3. Replace the lid.
Battery
Compartment
Lid
I]_
Point the remote
control
tw°_e:rdo ;_ ;a_eng_the?V Sw° _th_hteh ; TVote.
l(See
T elevision illustration below.)
I
SLEEP Button
Press to set the TV to turn itself off
automatically. Details are on page 5.
Number
Buttons
Pressto selectchannels,
• Cable Users
Enterchannelnumbers as a two.digit number for
the quickest results. For example, to select chan-
nel 6, press 0,6. Pressingonly Number button 6
will cause a brief delay. (There also may be a
brief delay when you select channels I 0, I I, and
12.) For channels 100 and above, enter three-
digit numbers. For example, to select channel
117,press I, 1,7
•
Antenna
Users
Enter channel numbers as a two-digit number for
the quickest results. For example, to select chan-
nel 5, press 0,5 Pressingonly the Number 5 but-
ton will causea delay in selecting channel 5 Only
channels 2-69 are available
STATUS/EXIT
Button
Press to see the current
channel number on the
TV screen.
Press to remove
the on-screen
menu
You also
may remove
the menu by pressing the
CH(annel)
A/V
buttons to select EXIT, then
pressing the VOL(ume)
I_/_ql buttons.
(You
may need to select EXIT repeatedly
to com-
pletely remove
all of the menus)
SLEEP
© ®
9
@
® @
@
@
@
cc
%
POWER
Button
Press to turn the TV on and off.
(Alternate
Channel)
Button
Press to return
to the previously
viewed TV
channel.
--MENU
Button
Press to access or remove
the on-screen
menu, Press the CH(annel)
AI•
buttons to
select an item in the menu. Press the
VOL(ume)
Iw/_l
buttons to adjust an item in
the menu or to advance to the next menu
Button
Press to disable the sound on the TV Press
again to restore the sound
I_I_I
Buttons
Press to adjust the TV sound level
Press to
adjust an item in the on-screen menu or to
advance to the next menu.
If you press the VOL(ume)
_I button
when
the sound is muted, the volume
bar will
appear on the screen Pressing the
VOL(ume)
Iw button
when the sound is
muted will restore the sound.
r'H(annel)
J Jr Buttons
Pressto scanthrough availablechannels.
Pressto select an item in the on-screen menu.
r'C (Closed
Caption)
Button
Press repeatedly to select a Closed Caption
mode. Details are on page 7.
_Press
the POWER
button
to turn on the TV.
Be sure to connect the TV
power cord to a standard
AC outlet first.
_
Press the VOLUME
• /•
buttons
to adjust the
sound eve.
Press the CHAN-
NEL • /•
buttons to select
available TV channels. (See
Auto Install above.)
L
,
Note:
I
You can connect earphones (not supplied) to the EARPHONE
jack on the front of the TV for private, personal listening.
Point the remote
control here when
using the remote
to work
the TV.
_
Press the MENU
button
to display the TV's on-screen
menu.
Press the CHANNEL
•/•
buttons to select an item in the
menu.
Press the VOLUME
•/•
but-
tons to adjust an item in the
menu or to advance to the next
menu.
Note:
To remove the menu,
press the CHANNEL
•/•
but-
tons to select EXIT. Then, press
the VOLUME •
or •
button.
(You may need to select EXIT
repeatedly to completely
remove
all of the menus.)
Or, press the MENU button,
repeatedly
if necessary, to
remove the MENU.
The current
channel number
will appear briefly
when the TV is first
turned on and with
channel changes. To
display the channel
number for five
seconds, press the
STATUSIEXIT
button.
You can turn on the
TV by pressing the
CHANNEL • or •
button on the front
of the TV. The
CH(annel) •/•
but-
tons of the remote
control will not turn
on the TV power.
4
Advertisement
