Advertisement
After installing
the batteries
into
the remote, press the TV System
-
button
to send remote
commands
to the TV. Point the remote toward
the front of the TV (remote sensor
window)
when pressing
buttons.
VCR Buttons
For use of VCR buttons see the "Using
the Remote With a VCR".
Menu (VA) Buttons
Press the M button to show on-screen
feature controls. Press • or • buttons
to move forward and backward
through the list of on-screen controls.
(-) and (+) Buttons
Press to adjust the selected on-screen
feature control.
V01um¢ Button
Press to adjust the TV sound level.
Re,€t/Enter Button
Press to returnthe TV to factory preset
levels for picture controls. Also can be
used as an Enter button when sending
channel commands to remote
controlled cable converters or VCRs.
_;mart Sound Button
Press to control TV sound levels. See
"Smart Sound/Auto Volume" section
for details.
Number Buttons
Press the number buttons to select TV
channels. Press two number buttons to
select single digit channels. For
example: to select channel 6...press
"0" first and thetn "6".
The remote's TV-VCR-CBL
System
buttons control how certain buttons on the
remote are used.
For example:
'With the "TV" System button pressed:
the MENU, (M)AY, and (+,-)
buttons are used to select and
adjust on-screen TV features.
With the "VCR" System button pressed:
the same buttons on the remote work
playback, search, pause, and other
VCR features.
PLAY •
STATUS
PAUSE II
_;tatus Button
Press to see the current channel
number on the TV screen. Also press
this button to clear the TV screen after
control adjustments.
Alternate
Channel Button
Press to select the previously viewed
channel.
For example: You are watching
channel 4 and change to channel l0
(using the channel number buttons).
Press A/CH and your TV will return to
channel 4. Press A/CH again and your
TV will return to channel 10.
Channel
Scan Button
Press to scan up or down through
channel numbers.
- Mute Button
Press to turn the sound OFF on the
TV. Press again to return the sound to
its previous level.
TV-VCR-CBL
System
Button_
Press to send remote control command.,
to either the TV, VCRs, or accessory
Cable Converters. See the "How to
operate VCRs and Cable Converters"
section for fu_her details.
Pgwer Button
Press to turn the TV (VCR or Cable
Converter) ON and OFF.
22
Advertisement
