Advertisement
m
our 11/can automatically set
tself for local area (or Cable
TV) channels. This makes it easy
for you to select only the TV
stations in your area when the
CH(annel) • • buttons are
pressed.
Please check and be sure the TV is
set for the type of signal you have
connected to the TV - Antenna or
Cable TV (see previous page.)
<_
Press MENU • or • on the
TV (or on the remote press M
button and then M A_' buttons.)
Select the word PROGRAM with
the TV's on-screen Arrow.
<_
Press the (+)
(on
button
the
TV or the remote) to PROGRAM.
<,,_
Press the (+)
again to
button
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
You may press any button (on the
TV or remote) to stop the channel
search at any time. When the
channel search is completed the
TV will return to the last viewed
channel.
<_
Press STATUS button to clear
I the screen
•
ITry it out. Press CHANNEL
&Y buttons and see which
channels have been added.
_
Remember. If you want to
drop any unwanted channels
from the TV's memory, see the
next page on how to "Manually"
add and delete channels.
Note: As the TV searches for
channels to "ADD" into memory
the on-screen display may move
(or jitter slightly). This is normal
operation and does not indicate a
need for service.
DPROGRAM
ii
7
"RED" c hannel numbers have _n
added to the TV's memory.
"WHITE"
channel
I pre_ent intheTV'sprogram memory,
I
he TV screen will be blocked off
until the search for channels is
done.
J
11
Advertisement
