Rerecording (Tape Duplication) - Magnavox VRT245A Owner's Manual

19
Rerecording (Tape Duplication)
VCR I
Playing VCR
(back view)
()UT(put) Jacks
V(2R 2
Recording VCR
(back view) TV
On
channel
ti€,u Vll)liO OUT 1o VIDEO IN 3 or 4
o :o
From AUDIO OUT to AUDIO IN IN(put)
Jacks
Audio and video cables arc =lotincluded.
Operation
Put a prerecorded
tape in VCR 1.
4-
Point the remote con-
trol at VCR 2 and
press Number but-
tons 0, 0.
Use the (Tap_e)-_
SPEED button to t-
select the recording
speed of VCR 2.
VCR 1
l l!!
°
®l®®
®1®®
®1® ®
Press the PLAY(X2)
button on VCR1 and
the REC(ord) button
on VCR 2 at the
same time.
3
Select channel 3 or
4 at the TV.
VCR 2
llz5 ........
Remote Control
-2
Put a blank
tape in VCR 2.
--....
m
m
The instructions on this page show you
how to copy tapes. The illustration uses
two VCRs just like yours. Different VCRs
may operate differently.
NOTE: Unauthorized recording of copy-
righted television programs, video tapes, or
other materials may infringe on the rights
of copyright owners and violate copyright
laws.
VCR 1 will play your tape. Insert a prere-
corded tape in VCR 1. If the tape does not
have a record tab, playback begins. If this
happens, press the STOP/EJECT button on
the VCR 1.
2
VCR 2 will record your tape. Insert a
blank tape in VCR 2. Make sure the power
is on and VCR 2 is in VCR position.
3
Turn the TV on and put it on channel 3 or
4, whichever channel to which the CH3/
CH4 switch on VCR 2 is set (see page
seven).
Point the remote control at VCR 2. Press
Number buttons 0, 0. A/V IN will appear
on the TV screen.
5
Point the remote control at VCR 2. Use
the (Tape) SPEED button to select SP or
SLP.
Press the PLAY(X2) button on VCR 1 and
the REC(ord) button on VCR 2 at the
same time.