Advertisement
After installing the batteries into
the remote, press the TV System
button to send remote commands
to the TV. Point the remote toward
the front of the TV (remote sensor
window) when pressing buttons.
%'_R Buttons
For use of VCR buttons see the "Using
the Remote With a VCR".
Menu (YA)
Buttons
Press the M button to show on-screen
fi.-ature controls. Press • or • buttons
to move forward and backward
through the list of on-screen controls.
1-) and (+) Buttons
Press to adjust the selected on-screen
feature control.
.Volume Button
Press to adjust the "IV sound level.
Reset/Enter Button
Press to return the TV to factory preset
levels for picture controls. Also can
be used as an Enter button when
sending channel commands to remote
controlled cable converters or VCRs.
Smart Sound Button
Press to control TV sound levels. See
"Smart Sound/Auto Volume" section
for details.
/
m
I
Status/Exit
Button
Press to see the current channel
number on the "IV screen. Also press
this button to clear the TV screen after
control adjustments.
Alternate Channel
Button
Press to select the previously viewed
channel.
For example: You are watching
channel 4 and change to channel l0
(using the channel number buttons).
Press A/CH and your "IV will return to
channel 4. Press A/CH again and your
TV will return to channel 10.
Channel Scan Button
Press to scan up or down through
channel numbers.
Mute Button
Press to turn the sound OFF on the
TV. Press again to return the sound to
its previous level.
PIP Buttons
Press to operate Picture-In-Picture
features. See PIP section for details.
Number Buttons
Press the number buttons to select "IV
channels. Press two number buttons to
select single digit channels. For
example: to select channel 6...press
"0" first and then "6".
TV-VCR-CBL System
Buttons
Press to send remote control commands
to either the TV, VCRs, or accessory
Cable Converters. See the "How to
operate VCRs and Cable Converters"
section for further details.
The remote's TV-VCR-CBL System
buttons control how certain buttons on the
remote are used.
For example:
With the "TV" System button pressed:
the MENU, (M)AY, and (+,-)
buttons are used to select and
adjust on-screen TV features.
With the "VCR" System button pressed:
the same buttons on the remote
work playback, search, pause,
and other VCR features.
I•U!•
x-€ OI4.SOREI_4
_:a _vuaEs
_1
•
j:
22
Advertisement
