Advertisement
_._lease
make these simple
][checks
before calling for
service.
These tips can save you
time and money since charges for
73/installation
and adjustment
of
customer
controls
are not
covered
under y-our warrant.
No Power
No Picture
No Sound
Remote
Does Not
Work
TV Displays
Wrong
Channel
or No
Channels
Above
13
CAUTION: A video source (such as a video game, Compac: Disc Interactive - CDI, or
TV information channel) which shows a constan! non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc) could leave an image
permanently on the picture tube. When not in use, turn the video source OFT. Regularly
alternate the use of such video sources with normal TV viewing.
i
heck the TV power cord. Unplug
the "Ia/, wait 1 minute,
then reinsert plug into outlet
and push POWER
button again.
Check to be sure outlet is not on a wall switch.
Check antenna connections on the rear of the TV. Are they properly secured to the
antenna plug on the TV?
Check the CABLE TUNING control for correct position.
Check PICTURE SOURCE control for correct position ANT A or B, AUX1, AUX 2,
or AUX 3 position without a signal source will result in a blank screen.
Check the CLOSED CAPTIONS control. Some TEXT mcdes could block the screen.
Check the VOLUME
and MUTE buttons on the TV and remote.
Check the TV SPEAKER
NORMAL/OH'
control for the correct position.
If attempting
auxiliary
equipment
hook-ups,
check audio jack connections;
and that the
auxiliary
equipment
is on and in the proper operating
modes.
Check TV--VCR-CBL
"System"
buttons
on the remote. Press the remote's
TV System
button to send commands
to the TV; VCIq' System
to sent to VCR; etc.
Check batteries.
Replace with AA Heavy Duty (Zinc Chic ride) or Alkaline
batteries
if necessary.
Clean the remote
and the remote sensor window on the TV.
i
epeat channel
selection,
i
Add desired channel numbers
(ADD/DELETE
CHANNELS
control)
into TV memory.
Check CABLE
TUNING
control for correct position.
This TV is equipped
with protective
circuitry
that shuts the "IV off in case of moderate
power surges. Should this occur turn the TV back on by pressing
the POWER
button
once or twice, or unplug _md then replug the power cord at the AC outlet.
This feature is NOT designed
to prevent damage due to high power surges such as those
caused by lightning,
which is not covered
by your warranty.
Cleaning
and ('are
• To avoid possible
shock hazard be sure the TV is unplugged
from the electrical
outlet before cleaning.
• When cleaning
the TV screen take care not to scratch or damage
the screen surface (avoid v_earing jewelry
or using
anything
abrasive-
do not use household
cleaners).
Wipe the front screen with a clean cloth dampened
with water.
Use
even, easy, vertical
strokes when cleaning.
• Specially
designed
screen cleaning
kits are also available
which contain
anti-static
cleaners
and cloths designed
to get
into the ridges of the TV screen. If interested,
ask your dealer about the MAG4600
Projection
TV Screen Cleaning
Kit or
call our toll-free
Accessory
Parts ordering
number
1-800-292-6066.
• Gently wipe the cabinet surfaces
with a clean cloth or sponge dampened
in a solution of cool clear water and a mild soap
or detergent.
Use a clean dry cloth to dry the wiped surfaces.
• Occasionally
vacuum
the ventilation
holes or slots in the cabinet back.
• Never use thinners,
insecticide
sprays, or other chemicals
on or near the cabinet, as they might cause permanent
marring
of the cabinet
finish.
51
Advertisement
