Advertisement
T_or
more convenient
Direct
€
t
playback
connections
the TVs
Front Audio/Video
Input panel can
be used. Located
next to the TV's
front
control panel (under a small
cover door) these Input jacks
allow
for quick and easy connections,
p6_rticularly Jbr the playback
of
Camcorder
tape recordings.
To view the playback
of a
Camcorder
recording
using the
Audio/Video
Input jacks
on the
front of the TV:
<_
Connect the VIDEO OUT jack
from the Camcorder to the Front
VIDEO IN jack on the TV.
_
Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
Camcorder to the Front AUDIO IN
jacks on the TV.
<_
Select the "AUX
3"
PICTURE
SOURCE
SELECT
control on the TV.
With the FEATURES MENU on
screen, move the REDhighlight
with the MENU (M) 4_ buttons.
Then press the MENU button.
<_
Press the MENU
&Y and
MENU
(M) buttons
to highlight
and select (u,") the AUX 3 mode.
_Turn
the Camcorder
ON and
press PLAY to view the tape on
the TV.
_
FF_TURE
MENU
1
PICTURE AND S DUND FROM PLAYBACK
@ @@
\
FRONT AUDIO/VIDEO
JACKS
Lift Up on Jackpanel Cover Plate
to expose Input Jacks.
VIDEO IN
(YEI_LOW)
AUDIO/VIDEO
OU'[ PUT JACKS
ON CAMCORDER
CAMCORDER
]f you have a single (monaural)
]
Auc io Output Camcorde_, "Y"
/
connectors are available to complete /
you: connection. Contact your
dealer, or our Parts Information
]
Center (1-800-292-6066)
to order
[
_myoptional accessories.
]
Remember,
after it is
connected
an easy way to
select the ALrX 3 mode is to press
rite VCR button on the front of the
TV (or the TViVCR
button on the
remote). Channels
3/4, ANT A/B,
AUX 2/3, and the last channel
viewed can also be selected
in this
way.
If you have added AUX
3 to the
TV's channel
memory
(see page
14), just press the CHANNEL
_L_' buttons
to select the
VCR/AUX
mode.
29
Advertisement
