Dvd Player - Philips DVDQ50 Owner's Manual

Hookups (cont'd) 11
Connecting to a
TV
Only
TV
has an S-Video In Jack
Back of TV
(example ortly)
3
UnuSed
Yellow
m m
I ,%_%_,%,°: I _®'®'® _ )®, U
L.............. J
1
Connect the supplied S-Video cable to the S-VIDEO OUT
jack of the DVD Player and to the TV's S-VIDEO IN jack.
2
Connect the red and white cables of the supplied three-
prong audio/video cable to one set of the Left and Right
AUDIO OUT jacks on the DVD Player. Connect the
other end of the cables to the left/right AUDIO IN jacks
on the TV. Match the cable colors to the jack colors.
3
Connect the flat end of the DVD Player's power cord
(supplied) to the MAINS (AC Power)jack on the back of
the Player,
Connect the power cords of the Player and the TV to a
power outlet,
Turn on the TV power. Press STANDBY-ON on the DVD
Player to turn on the Player. The Standby light will disappear.
4
Set the TV to the correct S-Video In channel. This channel
might be near channel 00. See your TV owner's manual for
details. Or, change channels at the TV until you see the DVD
logo on the TV screen.