Setting Your Tv For Antenna Or Cable - Sears 274.43918390 SERIES Owner's Manual

Using Advanced Features
Setting Your TV for Antenna or Cable
Your TV automatically adjusts this feature when the TV places channels
in memory (autoprogram). Follow the steps below to change the setting
as needed.
1.
Select the Setup menu
Controls Alarm
13
Press MENU repeatedly to select
the Setup menu. This menu is
white.
2. Highlight Cable/Air
Controls Alarm
13
Press CHANNEL down to
highlight Cable/Air.
3. Select Cable or Air
4. Press DONE to save the
setting
13
Controls Alarm Adjust
VCR 1 Channel: 00
A. Press + or -- to select Cable or
Air. Select Cable if you have
cable. Select Air if you have a
home antenna connected to
your TV.
B. Press DONE to save the setting.
25