Table of Contents
Advertisement
PREPARATION FOR USE
I I,_1_[ellr_,Ttl _ _'_=1 Iq::[e.]l d[e]i
If you want to change the language of the on-screen menu, follow the procedure below.
D
Connect the power cord to a standard AC outlet.
Note= If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
Press the POWER button to turn on the "rv.
Press the MENU button so that the menu display appears
on the "IV screen.
Press the CH(annel]
•
or •
button to point to "[ENGLISH]".
Select "ENGLISH"
or "ESPANOL" = Spanish by using
the VOL(ume]
• or • button.
Press the MENU button to exit the menu.
•
ICTURE
CHANNEL SET
[ENGLISH]ESPAf_OI
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
lib [ENGLISH]ESPAf_OL
V-CHIP SET UP
CAPTION {OFF]
14 SI-_I
_,I_I=II
I".i : i d,,,"! :1111 _[,t
To preset a channel or to change a preset channel, follow the procedure
below.
D
Press the POWER
button to turn on the TV.
Press the MENU button so that the menu display appears
on the "IV screen.
•
ICTURE
CHANNEL SET
[ENGLISH]ESPAi_OL
V-CHIP SET UP
CAPTION [OFF]
Press the CH(annel)
•
or •
button to point to "CHANNEL
SET".
Then, press the VOL(ume)
•
button.
I
PICTURE
• CHANNEL
SET
[ENGLISHJESPA fqOL
V_CHIP SET UP
CAPTION
[OFF]
Press the CH(annel)
•
or •
button to point to "AUTO MEMO".
Then, press the VOL(uma)
• button.
The tuner scans and memorizes
all active channels
in
your area.
• The TV distinguishes
between standard
TV channels
and cable channels.
• When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.
• When you press the CH(annel) •
or •
button after
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.
• The TV may recognize TV channels to be CATV channels
by the receiving conditions. In this case, try AUTO MEMO action again
in the fine receiving conditions.
I
ADD/DELETE
•
AUTO MEMO
[ADD/DELETE
FUNCTION]
1) Press the MENU button so that the menu display appears on the "IV screen.
2) Press the CH(annel)
• or • button to point to "CHANNEL SET".
Then, press the VOL(ume)
• button.
3) Press the VOL(ume) •
button so that "ADD/DELETE"
is selected.
4) Use the CH(annel) •
or • button to select the
channel you wish to put into memory or to erase from memory.
Note; The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE"
function while this display appears on the
screen.
• Press the VOL(ume)
• or •
button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
• Press the VOL(ume)
• or •
button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
PICTURE
•
CHANNEL SET
{ENGLISH]ESPA{90L
V_HIP
SET UP
CAPTION [OFF]
•
DDIDELETE
AUTO MEMO
I:l:k'tlhrJl: I;lll_[ll
i[I]_
If the power fails or is disconnected while the TV is powered on, the TV will turn on auto-
matically when the power resumes.
Advertisement
Table of Contents
