Hotpoint 18 Owner's Manual And Installation Instructions page 10

About crisper removal
Not all features are on all models.
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
\,
, ToRemove:
Removing the glass cover
Lift the drawe_ up slightly while pulling
them past the stop location.
If the door prevents you from taking out
the drawe_s, fi_st try to remove the door
bins. If this does not ofl_'r enough
clearance, the refrigerator will need to
be rolled forward tmtil the door opens
enough to slide the (h'awe_ out. In some
cases, when you roll the refi_Jgerator out,
you will need to move the refi_Jgerator
to the left or right as you roll it out.
Toremove the glass cover:
Remove the glass, then
the fl'ame. \_l_en
_eplacing the glass, push the fl'ont edge
fimflv into the fl'ame.
0 Push up the glass cover at the teat:
Slide the glass cover backwards tmtil the
fl'ont edge coin es out of the fl'am e.
0 Rotate the side of the glass cover up.
O Remove the glass cox'e_:
) [
jl in
_ m _ ,
! i
Removing the frame
Toremove the frame:
0 I,ifl up the fl'ont of the fl'ame using
both hands.
@ Slide the fl'ame fi>rward.
0 Rotate the side of the fl'ame up.
@ Remove the fl'ame.
About the additional features.
Not all features are on all models.
I i i
i i
ShelfSaver
TM
Rack
This slide-out rack holds twelve cans of soda
or two wine/water bottles (lengthwise).
Can be removed fin" cleaning.
To remove, slide the rack out to the stop
position, lilt the rack up and past the stop,
and lilt out.
10