GE GTWN3000M2WS Owner's Manual page 6

About washer features.
The Agitator Cap (on some models)
The agitator cap fits into the top of the
agitator. If it accidentally comes off,
simply put it back on.
SETTINGS
Set when adding
OFF FABRIC SOFTENER
d/or CLEAN RINSE
Fabric Softener Dispenser (onsome models)
The fabric softener dispenser automatically r{l Add water to dispenser until it reaches
releases liquid fabric softener. Setting the '_' the maximum fill line.
knob ensures that it dispenses at the proper
time.
Do not stop the washer or raise the lid
during the first spin. This will cause the
dispenser to empty too soon.
To use, follow these steps:
r_-i Hake sure dispenser issecurely attached
to agitator.
_] Useonly diluted liquid fabric softener.
Pour into dispenser,using amount
recommended on package.
Never pour fabric softener directly on items.
It may stain them.
Do not pour anything into the
agitator if the agitator cap or
dispenser is removed.
r41select FABRIC SOFTENER setting knob to
activate the cycle.
Note: Fabric softener will not dispense if the
knob is in the "OFF" position.
Separate for cleaning
Cleaning the Fabric Softener Dispenser (on some models)
_1 Removethe dispenser from the top of the agitator.
_] Separate the dispenser cup from the cover by grasping the top and pushing down on the
inside of the cup with your fingers. Dispensercup will pop free from the cover.
r-_] To clean the dispenser,soak both the dispenser cup and the dispenser cover in the
following solution:
• 1 USgallon (3.8liters) warm water
• 1/4 cup (60 ml) heavy-duty liquid detergent
• 1 cup (240 ml) bleach
_]lf necessary,loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush;
you may roughen the surface of the dispenser.
r-_ Rinseand reassemble dispenser. Placedispenser back on the agitator.
6