GE Cafe Owner's Manual And Installation Instructions page 41

Truth or Myth? Answer Explanation
Door removal is always required for installation, MYTH Check chart on reverse side of this instruction, Doors should only be
removed when necessary to prevent damage from passage way or
access to final location,
Refrigerator doors that won't close after installation, TRUE Door mechanism works best if installed at 90°+, If installed at 180 °,
can be adjusted to close properly, remove the door from the mid hinge, and swing the door 180 ° before
reinstalling, See Reinstalling the Refrigerntor Doors,
There is an adjustment to rear wheels, MYTH Front leveling legs are adjustable and should be used to balance the
refrigerator, Leveling legs are used to make initial fresh food door
adjustment,
Check for leaks after all water connections are made, TRUE While purging the air from the water system, check all water line
connections for leaks, Check the connection to the household water
supply at back of refrigerator, and door water line connect,
My LCD display will always be on when I plug the MYTH If the refrigerator has been stored in a cold environment, the LCD may be
power cord in at installation, slow to give a proper display, Give the refrigerator enough time to warm
up, and the display should be okay,
Any packaging residue can be cleaned off the MYTH Do not use wax, polish, bleach, or other products containing chlorine on
refrigerator using any cleaner, Stainless Steel panels, door handles and trim, Check this instruction under
"Cleaning the Outside" for full details,
41