GE GTL12 Owner's Manual And Installation Instructions page 7

GEAppliances.com
i iii /
iI_I II_IIIII_II_IIII _ _ _ _ _ _ _
Replacing the Light Bulb
Moving the contro/ to COLD does not remove
power to the light circuit,
The bulb is located behind the shield
in the back wall.
0 Unplug the refrigerator.
0 Remove the shelves (if necessary).
Remove the screw.
Gently remove the light shield by
inserting u flat head screwdriver
into the slot at the top of the shield
and pop it off.
Replace the bulb with a 2SW appliance
bulb with an E12 candelabra base.
NOTE:If the bulb is not available at your local
hardware store, contact GEcustomer service.
Insert the tab at the bottom of the light
shield into the light bulb housing and
snap into place.
Replace the screw.
Replace the shelves if removed.
Plug in the refrigerator.
Preparing for Vacation
Forlong vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with u baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leavethe doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator strays in an upright
position during moving,