Before Operation; Operation Of Remote Control Unit - Sanyo PLC-XW20A Owner's Manual

BEFORE OPERATION

OPERATION OF REMOTE CONTROL UNIT

Infrared signals are transmitted from this point.
INPUT BUTTON
Used to select input source.
(P22, 30)
D.ZOOM BUTTONS
Used to select DIGITAL
ZOOM mode and resize the
image. (P29)
KEYSTONE BUTTONS
Used
keystone distortion.
(P20, 35)
MENU BUTTON
Used to select MENU
operation. (P17, 18)
FREEZE BUTTON
Used to freeze the picture.
(P20)
NO SHOW BUTTON
Used to turn the picture into
black image. (P21)
AUTO PC ADJ. BUTTON
Use to operate Auto PC
Adjustment function. (P24)
P-TIMER BUTTON
Used to operate P-TIMER
function. (P21)
To insure safe operation, please observe the following
precautions :
G Do not bend, drop Remote Control Unit, or expose
Remote Control Unit to moisture or heat.
G For cleaning, use soft dry cloth. Do not apply
benzene, thinner, splay or any chemical material.
14
INPUT
KEYSTONE D.ZOOM
to correct the
MENU
NOSHOW FREEZE
AUTO PC ADJ. P–TIMER
POWER ON-OFF BUTTON
ON–OFF
Used to turn the projector
on or off. (P19)
VOLUME BUTTONS
Used to adjust volume.
VOLUME
(P21)
+
POINT BUTTONS
–
Used to move the pointer on
the MENU, to adjust the
item, or to pan the image in
DIGITAL ZOOM mode.
(P29)
SELECT
SELECT BUTTON
Used to execute the item
MUTE
selected or to expand /
compress the image in
DIGITAL ZOOM mode.
IMAGE
(P29)
MUTE BUTTON
Used to mute sound.(P21)
IMAGE BUTTON
Used to select image level.
(P27, 32)
Battery is installed in Remote
Control Unit.
Before operation, pull out and
remove a protect sheet from
Remote Control Unit. This sheet
protecting discharge of a battery.
AUTO PC ADJ. P–TIMER
BATTERY PROTECT SHEET
(transparent sheet)
IMAGE
Pull and remove.