Sanyo PLC-XU83 Owner's Manual page 28

Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as "User" in the Logo selection
(p48), the screen changes each time you press the NO
SHOW button as follows.
black out ➜ the captured image ➜ normal ➜
P-TIMER button
Press the P-TIMER button on the remote control. The timer
display "00 : 00" will appear on the screen and the timer
will start to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press the
P-TIMER button again, then the P-timer display will
disappear.
IMAGE button
Press the IMAGE button on the remote control to select a
desired image level of the screen.
For more detail, see p35, 42.
28
The message will disappear after 4 seconds.
• • • • •
P-Timer display
Remote Control
✔
Note:
See the previous page for the other buttons.
NO SHOW
button
P-TIMER button
IMAGE button