Important Safety Information - Hydrostar Drain Monster 68285 Owner's Manual & Safety Instructions

Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Rotation Switch of the tool to its "OFF" position and unplug the tool from its
electrical outlet before assembling or making any adjustments to the tool.
TO PREVENT SERIOUS INJURY:
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED.
Wear ANSI-approved safety goggles, heavy-duty LEATHER workgloves, and other appropriate
protective equipment when setting up your Drain Cleaner. For extra protection from chemicals and
bacteria on the machine and in the work area, we recommend wearing latex, rubber or other liquid
barrier gloves under the heavy-duty work gloves. Before use, inspect gloves to be sure they are free
of defects or loose sections that could be caught in the Drain Cleaner. Rubber soled, non-slip shoes can help
prevent slipping and electric shock, especially on wet surfaces.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK, TWISTED/BROKEN CABLES, CHEMICAL BURNS,
INFECTIONS AND OTHER CAUSES AND PREVENT DRAIN CLEANER DAMAGE:
Before each use, inspect Drain Cleaner and correct any problems.
1. Once the Drain Cleaner is assembled, check
the device and cutters for any signs of wear and
damage. If necessary, replace worn or damaged
parts prior to using the drain cleaning machine.
Dull or damaged cutting tools can lead to binding,
cable breakage, and slow the drain cleaning.
2. Verify Drain Cleaner is unplugged and inspect
the power cord, Ground Fault Circuit Interrupter
(GFCI) and plug for damage. If the plug has
been modified, is missing the grounding prong
or if the cord is damaged, to avoid electrical
shock, do not use the machine until the cord
has been replaced by a qualified electrician.
Item 68284 68285 For technical questions, please call 1-800-444-3353.
3. Clean any oil, grease or dirt from all equipment
handles and controls. This helps prevent the
machine or control from slipping during use.
4. Verify Foot Switch is attached to Drain Cleaner.
5. Verify Drain Cleaner is properly assembled.
Inspect the machine for broken, worn, missing,
misaligned or binding parts or any other condition
which may prevent safe and normal operation.
6. Make sure that switches and handles move
smoothly between positions and lock in place,
and that the bumpers at the bottom of the
handle are present and firmly attached.
Page 11