Using Ac Adapter - RCA CDS4100 User Manual

Using AC Adapter
To power the camera from an electrical
outlet, use the supplied AC adapter. To
attach the adapter to your digital camera:
1. Open the camera's connector cover by
inserting a thumbnail under the latch and
pulling it out.
The supplied AC adapter will allow the
digital camera to operate without batteries
.
AC Adapter jack
Plug in the Adapter Jack.
Important Notes!
• Be sure to use the supplied AC adapter only. Using any other AC
adapter may cause damage to the camera, voiding the warranty.
• When unplugging the AC Adapter from the wall socket, be sure to grasp
the plug (not the cord).
• Avoid undue bending, pulling, or twisting of the AC adapter cord.
• If the power cord should become damaged (exposed wires, disconnection,
etc.), please contact the store to purchase a new AC adapter. Use of a
damaged power cord may cause fire or electrical shock.
• Be sure to power off your camera before connecting or disconnecting
the adapter.
• The AC adapter may become warm to the touch after extended periods
of use.This is normal and is not cause for alarm.
6