Basic Hookup Methods - Fisher PC-20S00M Owner's Manual

QuickTips
The TV will automati-
cally select the correct
Antenna mode for the
type of signal you
connect.
TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Exception—When the
Video mode is
selected, the TV will
not automatically
switch off when signal
reception has stopped
for 15 minutes.
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive cable
programs, even with equipment
which is capable of receiving
cable channels, the consumer
must subscribe to the cable
company's service.
Use the 75 ohm terminal to connect a
VCR, cable, cable box, outdoor/indoor
antenna or satellite receiver directly to
the TV.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable service
and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or indoor
antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your cable or
antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR and TV
c
Outdoor or Indoor Antenna with VCR and TV
+
+
d Satellite Dish with Receiver, VCR and TV
CH3
CH4
OUT TO TV
75 OHM Terminal
VCR
IN
FROM ANT.
OUT
OUT TO TV.
Cable Box
VCR
IN
FROM ANT.
OUT
IN OUT
OUT TO TV.
IN
FROM ANT.
OUT
OUT TO TV.
CATV IN
VIDEO R- AUDIO
S-VIDEO
VIDEO R- AUDIO
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
TV BACK
UHF/VHF/CATV
TV BACK
VCR
UHF/VHF/CATV
VCR
RECEIVER
IN
FROM ANT.
OUT
-L IN FROM
SAT.
OUT TO TV.
-L
+
TV BACK
75Ω
75Ω
75Ω