Assembly - Fisher-Price 77770 Owner's Manual With Assembly Instructions

Take-along tunes
Table of Contents

Advertisement

Battery Charging
Battery
• Plug the charger connector into the battery
• Plug the charger into a standard wall outlet
Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is "ON".
• Before first-time use, charge the battery for at least 18
hours. Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each
use of your vehicle. Do not charge the battery longer
than 30 hours.
• Once the battery is charged, pull firmly on the charger
connector to disconnect it from the battery. Unplug the
charger from the wall outlet. The battery is now ready to
be installed in your vehicle. Please see the Battery
Installation section on page 19 for detailed instructions on
installing your battery. If your battery is already installed in
your vehicle, simply re-connect the motor harness
connector to the battery and lower and fasten the hood.
Charger
Connector
.
.
8
F

Assembly

WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
1
• Position the dash face down.
• Remove the #10 x 1" screw, as shown, that holds the
CD player in the dash.
• Remove the CD player from the dash.
IMPORTANT! Please save the screw if you would like to
attach the CD player to the dash (see page 11, step 9.)
CD Player
Dash

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power wheels barbie jeep 77770

Table of Contents

Save PDF