Fisher-Price 77770 Owner's Manual With Assembly Instructions page 13

16
Hood
Latch
Hole
• Insert a hood latch into one of the holes in the vehicle
body, near the hood area.
• Twist the base of the hood latch
the vehicle body.
• Repeat this procedure on the other side of the hood
area to attach the other hood latch to the vehicle body.
17
Hood
Slot
• Position the hood over the front of the vehicle body
as shown.
• Insert the tabs on the hood into the slots in the
vehicle body.
• Close the hood.
Assembly
Hood
Latch
1 / turn to secure it in
4
Tabs
Slot
18
Large
Tab
Hole
• Position the windshield so that the wipers face the front
end of the vehicle.
• Insert and "snap" the two large tabs on the windshield
into the large slots in the dash.
• Pull up on the windshield to be sure it is secure.
19
• Fit and hold the brush guard against the front bumper.
• Insert two #10 x 1" screws through the front of the brush
guard and into the front bumper.
•Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
13
Windshield
Wipers
Large Slots
Front Bumper
Brush Guard
Large
Tab