GE Appliances WPSF4170 Owner's Manual page 16

Before you call for service...
Troubleshooting tips
Possible Causes What To Do
Drain hose is kinked or •
improperly connected
Straighten drain hose and
make sure washer is not
sitting on it.
Top of drain outlet should
be less than 8 ft. above
floor.
Pump is plugged up • Have the pump cleaned.
Fill hoses or drain hose is
improperly connected
Make sure hose
connections are tight at
faucets and make sure end
of drain hose is correctly
inserted in and secured to
drain facifity.
Household drain may
be dogged
• Check household
plumbing. You may need
to call a plumber.
Constant water pressure
to the fill hoses at the
water source
• Tighten hoses at the
faucets and turn the water
off after each use.
• Check Condition of the fill
hoses; they may need
replacement after5 )'ears.
Washer is uneven • Make sure washer is level
and firm m the floor.
Washer load is • Push the Cycle knob in to
unbalanced stop the w_ksher, open the
lid and redistribute the
load evenly. Close the lid
and restart.
Thewasher
normally
pauses
between washingsteps
Incorrect cycle selected • Make sure the cycle
selected matches the load
you are washing.