Microdia FlashMover 4-in-1 CF/SD Installation Manual

Cf/sd usb card reader

FlashMover 4-in-1 CF/SD Card Reader

Installation Guide

Congratulations on purchasing the FlashMover 4-in-1 CF/SD USB Card Reader!

The FlashMover 4-in-1 CF/SD Card Reader works with USB enabled Microsoft

Windows 98, ME, 2000, XP, and Mac 8.6/9/X and higher systems. This Installation

Guide contains all the information you need to install your FlashMover 4-in-1 CF/SD

Card Reader.

Table of Contents

Need help?

Do you have a question about the FlashMover 4-in-1 CF/SD and is the answer not in the manual?

Page 1 Congratulations on purchasing the FlashMover 4-in-1 CF/SD USB Card Reader! The FlashMover 4-in-1 CF/SD Card Reader works with USB enabled Microsoft Windows 98, ME, 2000, XP, and Mac 8.6/9/X and higher systems. This Installation Guide contains all the information you need to install your FlashMover 4-in-1 CF/SD Card Reader.
Page 2 A. Windows Users To install the FlashMover 4-in-1 CF/SD Card Reader on Windows 98/98SE/2000: 1. Do not Plug the card reader to the PC’s USB port before the installation is completed. 2. Insert the Driver CD-ROM in the CD-ROM drive.
Page 3 B. Macintosh Users To install the FlashMover 4-in-1 CF/SD Card Reader on Mac OS 8.6 and OS 9 1. Insert the Driver CD-ROM in the CD-ROM drive. 2. Double click the CD-ROM icon and choose “Compact Flash + Secure Digital”.
Page 4 Caution: Failure to properly “eject’ the card before removing the card from the card reader could cause data loss or corruption. ** Most problems or technical issues can be resolved by simply visiting our Support & Services section inside our website, www.microdia.com or send us an email to support@microdia.com.