Microdia iFlash SM-Direct Installation Manual

Usb card reader

iFlash SM-Direct Card Reader Installation Guide

Congratulations on purchasing the iFlash SM-Direct USB Card Reader!

The iFlash SM-Direct Card Reader works with USB enabled Microsoft Windows 98,

ME, 2000, XP, and Mac 8.6/9/X and higher systems. This installation Guide contains

all the information you need to install your iFlash SM Card Reader.

Table of Contents

Need help?

Do you have a question about the iFlash SM-Direct and is the answer not in the manual?

Page 1 SM-Direct Card Reader Installation Guide Congratulations on purchasing the iFlash SM-Direct USB Card Reader! The iFlash SM-Direct Card Reader works with USB enabled Microsoft Windows 98, ME, 2000, XP, and Mac 8.6/9/X and higher systems. This installation Guide contains...
Page 2 10. Insert Smart Media card, then you can access files in your card. * Please check our website www.microdia.com to download the latest driver. To install the iFlash SM Card Reader on Windows Me/2000/XP: 1.
Page 3 7. Insert Smart Media card, then you can access files in your card. * Please check our website www.microdia.com to download the latest driver. To install the iFlash SM Card Reader on Mac OS 9 and OS X Note: Please go to Mac website to update the Mac OS to the latest version.
Page 4 C. Removing your SM card from the iFlash SM-Direct USB Card Reader To remove the Smart Media card on Windows system 1. Close any files that are opened and reside on the Smart Media card. 2. Wait until the green LED Activity light stops flashing, then you can remove your card safely.