Mounting A Camera; Installing And Connecting The Cameras And Dvr - First Alert 4800 User Manual

M C
OUNTING A AMERA
Select the position for the camera and secure the camera stand. (Use an appropriate
1
screw type for the mounting surface.)
Screw the camera onto the stand. Tighten the lock nut.
2
Adjust camera to the proper view angle. Make sure the lens is upright relative to the
3
subject. Tighten the thumb bolt.
I C
NSTALLING AND ONNECTING THE
Connect the camera video connector into the BNC cable (supplied).
1
Connect the BNC connector on the other end of the cable to the video input on
2
the DVR.
Plug the camera power connector into the BNC cable.
3
Plug the other end of the camera power cable into one of the camera splitter
4
connectors.
Plug the power connector from the splitter to the power input on the rear panel of
5
the DVR.
Plug the 12V DC power supply adapter to the splitter.
6
Plug the power supply cord into an electrical outlet.
7
thumb screw
lock nut
C DVR
AMERAS AND
Setting Up
Model 4800 User's Manual