Present Time Setting; Correcting The Time - Marantz SR2100 User Manual

EON (ENHANCED OTHER NETWORK) SEEK
The EON gives information from the other network of RDS.
Information, such as TA, PTY, etc., can be obtained from other
stations. The SR2100 has a special function for this EON data, as
follows:
[Features of EON function]:
This feature automatically changes source from CD (for example)
to tuner when desired programme (NEWS or TA) is received by the
tuner.
For example, if while listening to a CD, the tuner receives NEWS or
a traffic announcement program, the receiver will change its
source from CD to tuner automatically. When the program is
finished, the receiver's source will return to CD.
By remote control
To change the mode to tuner, press the FM/AM button c, and the
1.
NEWS/TA button ⁄2 among the control buttons.
2. The display indicates "EON SEEK". Press the ENTER button of
JOG control n.
3. The EON SEEK starts to scan, and will stop scanning when the
tuner receives a station which has EON information. The "EON"
indicator lights up. To advance to the next EON station with an
EON flag, press the ENTER button n again within 5 seconds.
After the above procedure, press the NEWS/TA button ⁄2 until the
4.
display shows the desired programme, NEWS or TA or NEWS
and TA.
5. The desired program name lights up in the display (the NEWS or
TA or NEWS and TA segments).
6. Change to the source you desire, for example CD, and play a CD.
7. The source will change automatically to tuner when the desired
programme for EON information is detected. The NEWS or TA
indicator blinks at this time. (The CD player will not stop)
8. The source selector will return to the previous source, CD, when
the desired programme is finished.
By main unit
To change the mode of JOG control @5 to RDS mode, press the
1.
TUNER button !7 until "RDS MODE" is displayed and press the
ENTER button @5 of JOG control . Turn the JOG control until the
display indicates "EON SEEK" and press the ENTER button @5 .
2. The EON SEEK starts to scan, and will stop scanning when the
tuner receives a station which has EON information.
The "EON" indicator lights up. To advance to the next EON station
with the EON flag, press the ENTER button @5 again within 5
seconds.
3. After the above procedure, press the NEWS/TA button until the
display shows the desired programme, NEWS or TA or NEWS
and TA.
4. The display will show the desired program name (NEWS or TA or
NEWS and TA).
5. Change to the source you desire, for example CD, and play a CD.
6. The source will change automatically to tuner when the desired
programme for EON information is detected. The NEWS or TA
segment indicator blinks at this time. (The CD player will not stop.)
7. The source selector will return to the previous source, for example
CD, when the desired programme has finished.
CT (CLOCK TIME) IN RDS
The CT is clock time information from the RDS. This data can be
copied to the present time by the CPU (microprocessor).
You can also turn this feature ON or OFF, and select a preset station
when it is set to ON position. (The initial preset station is M01)
For detail of this feature, please refer to page 16, SPECIAL
FUNCTIONS.
To display the RDS clock time, press the DISPLAY button @2 / m.
1.
Note:
When the RDS clock time is displayed, please check the local time
in your country.

PRESENT TIME SETTING

Operation using the main unit
The initial clock display is "0:00". To operate the timer program, you
must set the present time.
The following shows as an example how to set the time as 13:30, or
1:30 PM.
Press the DISPLAY button @2 except when "TUNER" is shown.
1.
The display changes to clock time.
DISPLAY
Press the MEMORY button !9 . The hour digit blinks in the display.
2.
Turn the JOG control @5 to set the digits displayed to the left of the
3.
colon to "13", or "1".
Press the ENTER button of JOG control @5 , to set he hour digits
have been set. Then minute digit starts blinking.
MULTI JOG (PUSH ENTER)
Turn the JOG control @5 to set the digits displayed in the minutes
4.
to "30".
Press the MEMORY button !9 to set the clock. The clock now
5.
starts.
MULTI JOG (PUSH ENTER)
Note:
The 12-hour system can be set through the SPECIAL FUNCTION
menu. Please refer page 16.

CORRECTING THE TIME

The displayed time can be corrected simply if it is done near the "00"
minute of an hour.
The following example shows the displayed time, 13:58, is to be
corrected to 14:00.
1. To change the display mode to clock, press the DISPLAY button
@2 . The display indicates the clock.
Press the MEMORY button !9 for more than 3 seconds.
2.
3. All digits start to blink.
Press the MEMORY button !9 to set the clock. The display
4.
changes to "14:00".
Note:
The displayed hour does not change if the minute figures displayed
are between 00 and 29. If they are between 30 and 59, the
displayed hour increases by one. (e.g: 12:29
14:00)
13
MEMORY
MULTI JOG (PUSH ENTER)
MEMORY
12:00, 13:58