General Settings - Marantz UD7007 Owner's Manual

General Settings

Settings for system, language, parental lock, network, etc. can be made.
System
Set the following settings.
• Screen saver settings
• Power saving mode settings
• HDMI control function settings
• Initialize settings
• Firmware update from the Internet
• BD-Live™ download data save location settings and initialization
Setting items
Screen Saver On : The screensaver function activates when stop or pause status
Sets the screensaver. continues for about three minutes.
Off : Does not use the screensaver.
Auto Standby On : This setting automatically sets the power to standby if any of the
This setting automatically following states continues for approximately 30 minutes.
sets the power to standby. • Disc not loaded
• Playback stopped
• Stopped due to the resume function
Off : Does not use the auto power mode.
Energy Saving Mode Energy Saving Standby : This is the lowest power consumption mode.
Sets the standby mode. During standby, operations are not accepted via HDMI control.
STANDBY indicator status in standby mode : Red
Normal Standby : During standby, operations are accepted via HDMI
control. Power consumption is slightly higher at this time.
STANDBY indicator status in standby mode : Orange
Quick Start : Startup time is reduced but more power is consumed in this
mode. HDMI control operations are accepted.
Power indicator status in this mode : Orange
DVD
Default settings are underlined.
Setting details
Setting items
HDMI Control Off : Disables the HDMI control function.
Links the unit and a device HDMI AMP On : Links with the device connected to the HDMI AMP
connected with an HDMI output.
cable that supports HDMI HDMI MONITOR On : Links with the device connected to the HDMI
control. MONITOR output.
• For the HDMI control function to operate, it is necessary for the unit or
HDMI-compatible TV connected to the unit to have an HDMI connection.
• Refer to "HDMI control functions"
on HDMI control functions.
• After the "HDMI Control" setting has been changed, always turn off the
power to the connected equipment and then turn it back on.
HDMI Power Off Control On : Turns the unit's power to standby through linkage to the TV.
Links the power of the unit Off : Does not turn the unit's power to standby through linkage to the TV.
and a device connected with
an HDMI cable that supports
HDMI control.
Reset Cancel : Does not initialize.
All settings including audio OK : Executes initialization.
mode and picture quality are
set to default settings.
39
Setting details
(vpage 35) for more information
v See overleaf