Advertisement
VOLTAGE WARNING:
Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified o n the
nameplate of the tool.
A
power source w i t h voltage greater than that specified
for the tool can result in
SERIOUS INJURY
t o the user
-
as well as damage t o
the tool. If in doubt,
DO NOT PLUG IN THE TOOL.
Using a power source
with
voltage less than the nameplate rating is harmful t o the motor.
SAVE THESE INSTRUCTIONS.
PRECAUTION IN USE
Do not use with D.C. application.
4
Advertisement
