Makita 9300 Instruction Manual page 10

Assembling circular saw sharpening kit
1. First install fixed rod with cross point
into hole in the inclining tool rest.
Secure with thumb screw B
so
that
screw end fits into indentation on the
rod.
2. Now slide rod for mounting saw blade
holder and
set
nut into hole below on
cross point. Secure with thumb screw.
Note flat side of rod should be on the
bottom.
Set blade holder for circular saw into
hole for
it
on sliding rod. Then
set
nut
screws into the blade holder hole.
Actual sharpening procedure
1. Unscrew
set
nut and
set
circular saw
blade on holder. Secure carefully to
holder with the
set
nut.
10