WPS (Wi-Fi Protected Setup)
If your access point or wireless router that supports PIN or WPS(Wi-Fi Protected Setup), it's available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
Select the wireless network setting type.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
Previous
1
Repeat step 1-4 on P.21.
2
Select Simple setting (WPS-button mode).
3
Select Connect.
4
Repeat step 4-5 on P.17.
ꔉ Next
Exit
Simple setting (WPS-button mode)
Press PBC mode button of AP and press 'Connect' button.
Connect
Caution: Check if PBC mode button is available for your AP.
ꔉ Next
Previous
Exit
23