When installing:
• In models with a wireless LAN card that has two antenna connectors, plug the gray cable into the
connector labeled MAIN or M, and the black cable into the connector labeled AUX or A on the card. If the
computer you are servicing has three cables, put the white cable in the cable protection tube.
• In models with a wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into the
connector labeled TR1, the white cable (third) into the connector labeled RO or TR3, and the black cable
(AUX) into the connector labeled TR2 on the card.
1060 PCI Express Mini Card for wireless WAN or mSATA solid-state drive
For access, remove this FRU:
• 1010 Battery pack
The computer you are servicing might come with one of the following cards installed: PCI Express Mini Card
for wireless WAN, PCI Express Half Mini Card for wireless WAN, or mSATA solid-state drive.
Removal steps of PCI Express Mini Card for wireless WAN
Note: Remove the screws
72
Hardware Maintenance Manual
1
.