4:3 Mode; Rotate; Language; Option Menu - Sharp AQUOS LC-26P50E Operation Manual

Menu operations

4:3 Mode

Menu Operation: A (page 9)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Item
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
WSS signal 4:3 screen
4:3 mode "Normal"

Rotate

Menu Operation: A (page 9)
You can set the orientation of the picture.
[Normal] [Mirror]
ABC C B

Language

Menu Operation: A (page 9)
You can select a language from the Setup menu. Select
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)

Option menu

MENU [ Option ]
Option

Audio Only

DNR
Input Select
Quick Shoot
Colour System
Demo
NOTE
• The HDMI Setup menu is displayed only when "EXT4" is
selected from the INPUT SOURCE menu.
Audio Only
Menu Operation: A (page 9)
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Item
On: Audio is output without screen image.
Off: Both screen images and audio are output.
LC-26P50E_GB_b
4:3 mode "Panorama"
[Upside [Rotate]
Down]
A A B C ABC
[Off]
[CVBS]
[On]
[AUTO]
15

DNR (Digital Noise Reduction)

Menu Operation: A (page 9)
Produce a clear image. (Off, High, Low)

HDMI Setup

HDMI (High-Definition Multimedia Interface) terminal
selection.
1
To watch an HDMI equipment image, select
"EXT4" from "INPUT SOURCE" menu using b
on the remote control unit or on the TV.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press OK.
• The HDMI Setup menu is displayed only when
"EXT4" is selected from the INPUT SOURCE menu.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
DNR [Off]
HDMI Setup
Quick Shoot [On]
Demo
5
Press a/b to select the desired item or setting,
and then press OK.
HDMI Setup
Selectable items
items
Signal RGB/YCbCr 4:4:4/
Type* YCbCr 4:2:2
Colour
ITU601/ITU709
Matrix*
Dynamic
Normal/
Range*
Enhanced
Auto View
Enable/Disable
Audio Digital/Analogue
Select
NOTE
• Refer to your external equipment operation manual for
the signal type.
may be greyed out (with 4) depending on
• Items with
*
the Input Select setting.
05.6.13, 8:00 AM
Description
Select the video signal
type from the HDMI
terminal.
Select the internal colour
space conversion method
when an RGB signal is
input.
Select the signal amplitude
range. Usually, select
"Normal".
Set whether or not to use
WIDE MODE based on
signal recognition,
including an HDMI signal.
Select "Digital" for audio
signal via the HDMI
terminal. Select "Analogue"
for audio signal via the
AUDIO jack.
15