Connecting Cable Or Satellite Boxes With Hdmi - Sceptre E195 User Manual

Connecting Cable or Satellite boxes with HDMI...

1. Make sure the power of E195 LED backlit LCD HDTV and your set-top box is
turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other
end to the HDMI port on the back of your E195 LED backlit LCD HDTV.
3. Turn on the E195 LED backlit LCD HDTV and your set-top box.
Use the remote control's source button or the source button on the TV to
4.
switch to HDMI.
Please Note :

Please reference the set-top box's manual, to make sure the set-
top box is configured to output correctly to the TV.

Sceptre's E195 LED backlit LCD HDTV supports SONY's
universal remote code. Please look up SONY's codes in your
universal remote's hand book.
- 19 -
www.SCEPTRE.com
SCEPTRE E195 HDTV User Manual