Connecting To A Pc With Vga And 3.5 Mm Minijack - Sceptre E47 User Manual

Connecting to a PC with VGA and 3.5 mm minijack ...

1. Make sure the power of
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to
the VGA port on the back of your
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA
Stereo Input port.
4. Turn on the power of the
Use the remote control's source button or the source button on the TV to switch to PC.
5.
6. Change your PC resolution to 1920x1080 at 60 Hz refresh rate.
Press MENU to use the OSD's PICTURE option.
7.
8. Under the PICTURE option select PC Settings.
9. Under PC Settings use AUTO ADJUST to adjust the screen.
Please Note :

For the best results, please set your PC resolution to 1920x1080 at 60 Hz. Please
refer to the PC or graphic card's manual for further instructions on how to set your
resolution and refresh rate.

Please refer to your PC manual for video output requirements of the video card.

The VGA port of the TV features a power saving mode which will automatically turn
off the TV, if there's no signal provided for more than 5 minutes.
HDTV
and your PC is turned off.
HDTV
.
HDTV
and your PC.
- 21 -
www.SCEPTRE.com
SCEPTRE E47 HDTV User Manual