Sceptre E47 User Manual page 15

For universal remotes, this TV follows SONY's universal remote code. You need
to find the actual code from your cable or satellite or universal remote provider.
POWER – Turns the TV on or off.
1.
INFO – Shows the display info.
2.
FREEZE – Press this button to freeze current picture.
3.
SLEEP – Turns the TV off in a specific set of time dependent on your selection.
4.
CC – Cycles between different closed captioning modes.
5.
MTS – Selects stereo, mono, or second audio programming.
6.
FAVORITE – Gives you your list of favorite channels.
7.
ADD/DEL – Adds or Deletes current channel from the favorite list.
8.
FAV(-) – Press this button to change to the previous favorite channel.
9.
FAV(+) – Press this button to change to the next favorite channel.
10.
NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you
11.
are watching TV. The channel will change after 2 seconds.
(-) – Inserts the dash for selecting digital channels directly.
12.
R – Returns to the previous channel.
13.
PICTURE – Selects various preset picture settings.
14.
MUTE – Turns the sound off from the TV. To un-mute either press VOL(+) or
15.
press the MUTE button again.
VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
16.
CH(+)/CH(-) – Press the CH buttons to switch to the next or switch to the previous
17.
channel.
SOUND - Selects various preset sound settings.
18.
ASPECT – Press this button to change the picture's cropping method.
19.
GUIDE – Opens the current digital channel information guide (antenna only).
20.
SOURCE – Press this button to cycle through the INPUT source.
21.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the
22.
TV's menu. Press the ENTER button when you want to select a particular option.
MENU – Brings up the main TV menu on the screen.
23.
EXIT – Exit the main TV menu on the screen.
24.
TV – This button select the source TV.
25.
USB – Launches the USB reader function for the pictures and music.
26.
YPBPR – This button select the source YPbPr (Component).
27.
MHL – This button selects the source HDMI 3 for MHL connection or regular HDMI
28.
connection.
A – Not used.
29.
B – Not used.
30.
C – Not used.
31.
D – Not used.
32.
The following buttons are functions designed to work with the optional accessory,
Sceptre Sound Bar.
POWER – This button turns on the sound bar.
33.
S.SOURCE – This button selects the sound bar's sound connection.
34.
S.MODE – This button selects the sound bar's sound modes.
35.
S.VOL(-) – This button decreases the volume of the sound bar.
36.
S.VOL(+) – This button increases the volume of the sound bar.
37.
- 15 -
www.SCEPTRE.com
SCEPTRE E47 HDTV User Manual