Table of Contents
Advertisement
Attaching or Removing the Stand
1.
To attach the base place the display unit flat on a table. Afterwards remove the 2
screws at the bottom of the neck show below.
2.
Align the glass base with the neck and then screw in the 4 provided screws to
tighten the base with the neck. Please save the left over 2 screws for future use.
3.
To remove the stand, remove the screws in the circled area and the base will
come off. Afterwards screw in the two originally removed screws to secure the
neck swivel assembly (refer to step 1 for picture).
SCEPTRE E320BV-FHD HDTV User Manual
- 8 -
www.SCEPTRE.com
Advertisement
Table of Contents
