Table of Contents
Advertisement
3.1.
Using the zoom function
The camcorder is equipped with
zoom.
Move the Zoom button right to get closer to a subject.
Move the Zoom button left to move away from a subject.
3.1.
Using the LED light
Use the LED light to illuminate subjects in dark environments.
Press the LED Light button to switch on the
again to switch it off.
3.1.
Using the Flash module, auto and force
Use the auto and force flash module to illuminate subjects in dark
environments when press the shutter button.
You may switch the auto and force flash module by toggling the
Flash button. The
activated.
3.1.
Using the Stabilizer function
Use the Stabilizer function to reduce vibration caused by camcorder
shanks during a video shoot.
See section 4.1.5 "Stabilizer".
3.1.
Quick access controls
You can also make adjustments to exposure by pressing the joystick
up and down.
In Camcorder and Camera modes, press the joystick up and down
to adjust the EV compensation settings. Press the joystick left to
choose white balance settings.
12x optical zoom
or
displays on your camcorder when
and 10X digital
LED light
and press
29
Advertisement
Table of Contents
