Brocade Communications Systems Brocade Fabric Watch User Manual page 34

Hub
Idle
Initiator
Integrated
Fabric
IOD
ISL
Isolated
E_Port
IU
JBOD
K28.5
L_Port
Latency
Link
Link Services
LIP
LM_TOV
Loop Failure
Loop
Initialization
Glossary-6
A fibre channel wiring concentrator that collapses a loop topology into a physical
star topology. Nodes are automatically added to the loop when active and
removed when inactive.
Continuous transmission of an ordered set over a fibre channel link when no data
is being transmitted, to keep the link active and maintain bit, byte, and word
synchronization.
A server or workstation on a fibre channel network that initiates communications
with storage devices. See also Target.
The fabric created by a SilkWorm 6400, consisting of six SilkWorm 2250
switches cabled together and configured to handle traffic as a seamless group.
In-order Delivery; a parameter that, when set, guarantees that frames are either
delivered in order or dropped.
Interswitch Link; a fibre channel link from the E_Port of one switch to the E_Port
of another. See also E_Port, Cascade.
An E_Port that is online but not operational due to overlapping domain IDs or
nonidentical parameters (such as E_D_TOVs). See also E_Port.
Information Unit; a set of information as defined by either upper-level process
protocol definition or upper-level protocol mapping.
Just a Bunch Of Disks; indicates a number of disks connected in a single chassis
to one or more controllers. See also RAID.
A special 10-bit character used to indicate the beginning of a transmission word
that performs fibre channel control and signaling functions. The first seven bits of
the character are the comma pattern. See also Comma.
Loop Port; a node port (NL_Port) or fabric port (FL_Port) that has arbitrated loop
capabilities. An L_Port can be in one of two modes:
•
Fabric mode Connected to a port that is not loop capable, and using fabric
protocol.
•
Loop mode In an arbitrated loop and using loop protocol. An L_Port in loop
mode can also be in participating mode or non-participating mode.
See also Non-participating Mode, Participating Mode.
The period of time required to transmit a frame, from the time it is sent until it
arrives.
As applies to fibre channel, a physical connection between two ports, consisting
of both transmit and receive fibres. See also Circuit.
A protocol for link-related actions.
Loop Initialization Primitive; the signal used to begin initialization in a loop.
Indicates either loop failure or resetting of a node.
Loop Master Time-out Value; the minimum time that the loop master waits for a
loop initialization sequence to return.
Loss of signal within a loop for any period of time, or loss of synchronization for
longer than the time-out value.
The logical procedure used by an L_Port to discover its environment. Can be used
to assign AL_PA addresses, detect loop failure, or reset a node.
Fabric Watch User's Guide