Use The Device"S Microsd Card As A Media Device - Kyocera Boost Hydro User Manual

Boost mobile
Table of Contents

Advertisement

3.
Touch Mass Storage > Done. See
4.
On your computer, the connected device is recognized as a removable disk. Navigate to
this removable disk and open it.
5.
Do one of the following.
Copy files from the computer to the root folder on the device‟s storage card.
Copy files from the device‟s storage card to a folder on your computer or computer
desktop.
6.
After copying the files, unmount the removable disk (that is, the connected device) as
required by your computer‟s operating system to safely remove your device, and
disconnect the device from the computer.
Note: The device will not recognize the microSD card when it is connected to a computer as a
disk drive. You will not be able to use some of the device‟s applications such as the
Camera or Play Music.
Use the Device's microSD Card as a Media Device
You can connect your device as a media device to your computer.
1.
Connect the device to your computer using the supplied USB cable.
2.
If you see
the USB connection notification.
3.
Touch Media Transfer > Done. See
microSD Card
PC
on the status bar, slide it down to open the Notifications panel and touch
Connection.
PC
Connection.
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hydro

Table of Contents