Kyocera Sprint DuraPlus User Manual page 20

Table of Contents

Advertisement

Warning:
Use only Sprint-approved or Kyocera-approved batteries and chargers with your
phone. The failure to use a Sprint-approved or Kyocera-approved battery and
charger may increase the risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death, or property damage.
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery
before it is fully drained.
For a quick check of your battery level, glance at the battery charge indicator located in the
upper right corner of your phone's display screen. When there are approximately five minutes of
talk time left, the battery icon (
After an additional five minutes or so, the phone sounds a warning tone three times and then
turns off.
Note: Long backlight settings, searching for service, vibrate mode, browser use, and other
variables may reduce the battery's talk and standby times.
Tip:
Watch your phone's battery level indicator and charge the battery before it runs out of
power.
Install the Battery
► See
Set Up Your
Remove the Battery
1. Make sure the power is off so that you don't lose any stored numbers or messages.
2. Turn the battery cover lock counterclockwise to the unlocked position (
3. Insert your thumbnail or a flat object into the slot (
4. Lift the battery and remove it from the phone (
Warning:
Do not handle a damaged or leaking Li-Ion battery as you can be burned.
Phone Basics
) turns red and the phone sounds a warning tone.
Phone.
) and pop off the cover (
).
12
).
).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Duraplus

Table of Contents