Advertisement
Storage and Browse
Store Measurements
Under measuring mode, as the resulting data is effective, hold down the
will be automatically stored into the instrument memory stick.
The unit has a maximum storage volume of 30 units.
Browse Measurements
Press
key to check stored measurement data
Press
key or
key to browse forward or backward. Hold down the
Tips
During operation, tip information may appear on the main display screen as follows:
Information
Err 1
Err 2
Err 3
Err 4
Err 5
Err 6
Technology specification
ITEM
Max measured distance
Distance measurement precision
Measurement unit options
Continuous measurement function
Outdoor target reflection board
Area measurement function
Volume measurement function
Pythagorean proposition measurement
function
Add and subtract measurement function
Min/Max value
Max storage
Automatic backlight
Buttons/Keys sound
Laser level
Laser type
Automatically cut off laser
Automatic shutdown
Storage temperature
Working temperature
Storage humidity
Battery
Weight(including battery)
Dimension
Note: There will be a bit of greater differences of measurement results in harsh environment, such as strong sunlight,
excessive temperature fluctuations, weak reflective surface, low battery.
Causes
Signal too weak
Signal too strong
Battery voltage is too low
Beyond working temperature
Improper Measurement in Pythagorean
proposition
Memory damage
40m
±2mm
Mm/in/ft
Yes
No
Yes
yes
Full mode
Yes
Yes
20 units
Yes
Yes
II
635nm, ＜1mW
20s
150s
-20℃ to 60 ℃
0 ℃ to 40 ℃
RH85%
1.5V, 3*AAA
180g
118*54*28cm
key for 3 seconds. The measurement data
key to remove all stored records.
Solutions
Measure target locations which are with
stronger reflecting capability
Measure target locations which are
weaker reflecting capability
Replace battery
Carry out measurement with the meter in
the specified scope
Re-measure, and ensure the length of
hypotenuse is longer than that of right-
side
Please contact Kogan.
Advertisement
